[email protected]
aluminum-foil.jpg

Cold-Stamping Molding Aluminum Foil For Pharmaceutical Packaging Alloy 8021

Pharmaceutical Aluminum Foil | Pharmaceutical

6) Ratio of cold stamping aluminum and PTP: 4:1; 4.7:1 : Blister Aluminum Foil. 1) Structure: OP 1g±0.5g/AL 20-30/VC 3g-8g; 2) Specification: Width ≤850mm; 3) Heat Seal Lacquer: 3-8g/m2. 4) Surface: matte/brigh Tropical Aluminum Foil ; 1) Structure: PA25/AL45/VC; PA25/AL60/VC; PA25/AL75/VC; 2) Gsm: 150g; 200g; 240g; 3) Width ≤600mm; 4) ID of paper core:

Aluminium Blister Foil - For Blister

The main alloy of blister aluminium foil is 8011 and 8021. Medicine aluminum foil is widely used to manufacture alu alu foil and blister foil. Medicine aluminum foil has become a new type of pharmaceutical packaging material widely used in the world. Its main uses include blister packaging for pharmaceutical capsules and tablets, as well as bag-shaped packaging of powder granules and

Aluminium Foil In The Pharmaceutical Industry - Mingtai

Specification of Aluminium Foil for Blister Packaging Typical alloy:8021 aluminum foil Material status:O thickness(mm):0.04-0.065 width(mm):100-1600 Typical products: Blister packaging, etc. 2, PTP medicine aluminum foil It has good light-proof and barrier properties, and is

Pharmaceutical Packaging Aluminum Foil Alloy Collection

Tropical aluminum foil, also known as aluminum-plastic foil.The packaging of the tropical type blister is to add a layer of cold stamping aluminum foil outside the hot forming plastic blister and PTP aluminum foil. Such pharmaceutical packaging aluminum foil mostly uses 8021-O and 8079–O medicine aluminum foil, which is the most high-end packaging aluminium foil in the pharmaceutical

Alu Alu, Alu Alu Foil, Cold-form Foil, Cold Forming Foil

Alu alu foil, also called cold forming foil, or cold-form foil, is a kind of high barrier property of composite material, after cold stamping molding, can replace the PVC part of PTP blister packaging, which could greatly improve the protective for drugs (tablets,pills and capsules), extend the shelf life. Alu alu foil is the best composite film of blocking performance at present with ultimate protection against water, oxygen

Medicine Foil - Mingtai

Tropical Medicine Aluminum Foil. Typical alloy:8021 aluminum foil、8079 aluminum foil Material status:O thickness(mm):0.016-0.2 width(mm):100-1600 Typical products:High-end pharmaceutical packaging,

Cold Forming Aluminum Foil, Cold Forming Aluminum Foil

Cold forming reinforced 15 micron 8011 aluminium alloy aluminum foil coil for pharmaceutical. US $2250-$2430 / Ton. 3 Tons (Min Order) 5 YRS Zhanzhi Steel Ltd. 93.3%. cold form 8021 alu alu foil 130-160 microns for pharmaceutical Pharmaceutical Pills Packaging Cold Stamping Molding Forming Blister Aluminum Foil

Cold Formed Blister Aluminum Foil, Cold Formed Blister

offers 1,667 cold formed blister aluminum foil products. A wide variety of cold formed blister aluminum foil options are available to you, such as use, material, and

8021 Aluminum Foil For Medicine Packaging Application In

Specification of the common Pharmaceutical foil in Mingtai Aluminum Foil factory: Alloy Material: 8021, 8079 Alloy, O temper Thickness:0.01-0.08mm Width: 200-1600mm Length: 2000m or 4000m Tensile Strength:80-110Mpa The Highlights of 8021 pharmaceutical foil: 1. Wettability is over Grade A; 2. Erichsen Value is over

Bare Foil : UACJ Foil

High-performance foil 8021 is an alloy created from pure, aluminum base foil tempered with additional elements. Compared to the IN30 variety generally used for foil, it is extremely workable and has high tensile strength and stretchability. It also has excellent design properties, with minimal pinholes and uniformly smooth matte

Aluminium Foil For Pharmaceutical Packaging |

Nov 16, 2021  The pharmaceutical aluminum foil has tropical Blister Aluminum (Aluminum Plastic film) and stamping and forming solid medicinal composite foil (alu alu foil /cold form foil). It has good tensile strength after cold stamping. It is a protective cover for conventional aluminum-plastic blister packaging after

Cold Forming Blister Foil Pharmaceutical

Sep 18, 2021  For the shallow stamping, the aluminum foil thickness is reduced to 30μm. For applications where the punched bubble is particularly deep (≥15mm), the maximum thickness can be increased to 70μm. The pharmaceutical aluminum foil for cold forming is 8021-O and 8279-O aluminum foil with a thickness of 0.025-0.08mm. The 8021 and 8079 aluminum foil produced by Haomei

Alu Alu, Alu Alu Foil, Cold-form Foil, Cold Forming Foil

TAGS alu alu blister foil, Blister Foil, cold forming blister aluminum foil, Pharmaceutical packaging 1st layer: Over lacquer, to protect the printing, ensure the ink fastness and not easy to peel

Pharmaceutical Aluminum Foil For Packaging Price

Cold Forming Aluminum Foil (Alu Alu Foil): 1) Structure: OPA25/AL45/PVC60; OPA25/AL60/PVC) Gsm: 240g/ 281g 3) Specification: Width ≤700mm; Thickness: 140 - 160microns 4) OD of roll: 240mm - 280mm (can be customized) 5) Ratio of cold stamping aluminum and PTP: 4:1; 4.7:1 Pharmaceutical PTP Aluminum Foil: 1) Structure: OP 1g±0.5g/AL 20-30/VC 3g -

Aluminium Foil In The Pharmaceutical Industry - Mingtai

Specification of Aluminium Foil for Blister Packaging Typical alloy:8021 aluminum foil Material status:O thickness(mm):0.04-0.065 width(mm):100-1600 Typical products: Blister packaging, etc. 2, PTP medicine aluminum foil It has good light-proof and barrier properties, and is

Cold Forming Aluminum Foil, Pharmaceutical -

Medical cold formed alu alu foil 8021 soft temper 150mic for tablet view sliver roll forming aluminum foil for medical packing view The inner diameter is 76mm PTP aluminum foil for medical use can be printed for 1-3colors with DMF certificate view

8011 Foil - Mingtai

8011 aluminum foil is our company’s hot-selling product. Mingtai Aluminum can process 8011 aluminum foil with thickness of 0.016-0.5mm. The aluminum foil is mainly used in pharmaceutical packaging, food packaging, cable foil, milk cover material, sealing foil and other fields. Mingtai Aluminum can be customized according to customer

High Quality Cold Form Pharmaceuticals Aluminum

How is the quality of aluminium foil for medicine. The aluminium foil for medicine use 8011 and 8021 aluminum foil with temper O and H18. The medicine aluminium foil has a thickness of 0.04mm-0.065mm and is commonly used in the production of cold-form foil, alu alu foil, aluminum blister foil, pvc/pvdf/pe/pet alu foil.

8011 Aluminum Foil, Good Price From Manufacturer

8011 aluminum foil is used for bottle caps: liquor bottle caps, red wine caps, cosmetic caps, milk powder caps, medical caps, beverage caps, yogurt caps, etc. Advantages: food grade, brushing A grade, low ear rate; Aluminum foil 8011 is used for pharmaceutical packaging: PTP medicinal aluminum foil, cold stamping plastic foil, 8011-H18 medical packaging aluminum foil, capsule aluminum foil board, etc. Advantages: high cup convex value, high strength of aluminum

Bare Foil : UACJ Foil

High-performance foil 8021 is an alloy created from pure, aluminum base foil tempered with additional elements. Compared to the IN30 variety generally used for foil, it is extremely workable and has high tensile strength and stretchability. It also has excellent design properties, with minimal pinholes and uniformly smooth matte

Pharmaceutical Packaging With Gas-Barrier Aluminum Foil

Pharmaceutical Packaging with Gas-Barrier Aluminum Foil (Alloy 8011), Find details about Aluminum Foil, Aluminium Foil from Pharmaceutical Packaging with Gas-Barrier Aluminum Foil (Alloy 8011) - Xi′an Fangzhou Packaging Industry

Heat Seal Pharmaceutical Ptp Aluminum

Aluminium blister foil for pharmaceutical packaging Haomei. Aluminium blister foil 8011 and 8021 O H18 with thickness of 0.02-0.075mm are usually used in pharmaceutical packaging.The aluminum foil is base material for blister packaging, it need further process as printing, laminated with other film, the medicinal aluminum foil has strict requirement such as even in thickness and high

Blister Aluminum Foil, Blister Aluminum Foil

Quality Aluminium/Aluminum Foil 8021 O Pharmaceutical Foil, Blister Packaging, Medicine Packaging, Tablet Packing Foil 20microns. FOB Price: US $ 2500-3400 / Ton. Min. Order: 2 Tons. Usage: Refrigerator, Air Condition, Food Use, Kitchen Use, Pharmaceutical, Label Tag, Cable. Type:

Cold Stamping Mould Pharma Foil

Cold Stamping mould Pharma Foil. Description. 1. The foil needs to be plain, free from streaks, unevenness wrinkles, scratches, cracks, rust residuals, oil spots, oxidation and stains or from any other defects. 2. The end face of the foil roll should be plain, no edge warping and bruise.

Aluminium Foil For Pharmaceutical Packaging |

Nov 16, 2021  The pharmaceutical aluminum foil has tropical Blister Aluminum (Aluminum Plastic film) and stamping and forming solid medicinal composite foil (alu alu foil /cold form foil). It has good tensile strength after cold stamping. It is a protective cover for conventional aluminum-plastic blister packaging after

Cold Stamping Mould Pharma Foil

Cold Stamping mould Pharma Foil. Description. 1. The foil needs to be plain, free from streaks, unevenness wrinkles, scratches, cracks, rust residuals, oil spots, oxidation and stains or from any other defects. 2. The end face of the foil roll should be plain, no edge warping and bruise.

Cold Forming Blister Foil, Alu-Alu Bottom Foil, Alu-Alu

Cold Forming Blister Foil(Alu-Alu) is one kind of blister primary packaging material for solid pharmaceuticals, like tablet capsule. The foil produced in Dirante factory is three layers laminated: oPA / Alu / PVC, under using dry bond lamination technology. Cold Forming Blister Foil Structure: Cold Forming Blister Foil

Pharmaceutical Aluminum Foil For Packaging Price

Cold Forming Aluminum Foil (Alu Alu Foil): 1) Structure: OPA25/AL45/PVC60; OPA25/AL60/PVC) Gsm: 240g/ 281g 3) Specification: Width ≤700mm; Thickness: 140 - 160microns 4) OD of roll: 240mm - 280mm (can be customized) 5) Ratio of cold stamping aluminum and PTP: 4:1; 4.7:1 Pharmaceutical PTP Aluminum Foil: 1) Structure: OP 1g±0.5g/AL 20-30/VC 3g -

Pharmaceutical Packaging Aluminum Foil

Aluminum foil for pharmaceutical is a new industry that is widely used in pharmaceutical for pharmaceutical tablets, capsules and other pharmaceuticals. It undergoes printing, coating, winding, slitting, internal and external

Cold Forming Aluminum Foil, Pharmaceutical -

Medical cold formed alu alu foil 8021 soft temper 150mic for tablet view sliver roll forming aluminum foil for medical packing view The inner diameter is 76mm PTP aluminum foil for medical use can be printed for 1-3colors with DMF certificate view

Medicine Aluminum | Haomei Aluminium

The main alloy of medicine aluminum foil is 8011 and 8021. Medicine aluminum foil is widely used to manufacture alu alu foil and blister foil. Medicine aluminum foil has become a new type of pharmaceutical packaging material widely used in the world. Its main uses include blister packaging for pharmaceutical capsules and tablets, as well as bag-shaped packaging of powder granules and

Heat Seal Pharmaceutical Ptp Aluminum

Aluminium blister foil for pharmaceutical packaging Haomei. Aluminium blister foil 8011 and 8021 O H18 with thickness of 0.02-0.075mm are usually used in pharmaceutical packaging.The aluminum foil is base material for blister packaging, it need further process as printing, laminated with other film, the medicinal aluminum foil has strict requirement such as even in thickness and high

High Quality Cold Form Pharmaceuticals Aluminum

How is the quality of aluminium foil for medicine. The aluminium foil for medicine use 8011 and 8021 aluminum foil with temper O and H18. The medicine aluminium foil has a thickness of 0.04mm-0.065mm and is commonly used in the production of cold-form foil, alu alu foil, aluminum blister foil, pvc/pvdf/pe/pet alu foil.

Aluminium Foil Jumbo Roll Best Manufacturers In

Aluminium foil jumbo roll usually refers to extra wide and extra large aluminum foil coil. There are Mingtai aluminum foil jumbo rolls available in 0.007-0.2 thickness, 100-1550 width, and 150kg-2000kg weight per roll. Such as 8011, 3003, 1235 jumbo

Pharmaceutical Aluminum Foil Price | Supplier

Cold Forming Aluminum Foil (Alu Alu Foil) 1) Structure: OPA25/AL45/PVC60; OPA25/AL60/PVC60. 2) Gsm: 240g; 281g. 3) Width ≤700mm. 4) Thickness: 140-160microns. 5) OD of roll: 240mm - 280mm (can be customized) 6) Ratio of cold stamping aluminum and PTP: 4:1;

3004 Foil - Mingtai

Usages of 3004 Aluminum Foil. 1. Food Packaging. 3004 aluminum foil can be used in ziplock bags such as dried fruits, BBQ, dessert baking, and other food packages. 3004 aluminium alloy foil ensures good and uniform heat transfer and can be used in traditional stoves and microwave

Features Of 8021 Aluminum Foil - News - Henry Metal

Sep 04, 2021  Features of 8021 Aluminum Foil: 1. Reduced costs. Minimal pinholes (a 70% reduction compared to Aluminum Foil 7μ) ensures better performance for applications such as pharmaceutical packaging, electronics packaging, retort packaging and LL containers, all of which require barrier performance. This better performance helps reduce costs.

Pharmaceutical Packaging Aluminum Foil

Hot Aluminum Foil 8021 O Pharmaceutical Foil, Blister Packaging, Medicine Packaging, Tablet Foil, Ptp Packaging Alu Foil 0.02mm FOB Price: US $ 2500-3400 / Ton Min. Order: 2

Aluminium Foil For Pharmaceutical Packaging |

Nov 16, 2021  The pharmaceutical aluminum foil has tropical Blister Aluminum (Aluminum Plastic film) and stamping and forming solid medicinal composite foil (alu alu foil /cold form foil). It has good tensile strength after cold stamping. It is a protective cover for conventional aluminum-plastic blister packaging after

8011 Aluminum Foil In

Aluminum Foil Suppliers-8011 Aluminum Foil VS 8021. 8011 Aluminum Foil VS 8021 Aluminum Foil Back 10:54. In aluminum foil materials, 8011 aluminum foil and 8021 aluminum foil are commonly used alloys, although both belong to the 8-series aluminum alloy, but there are some differences in the composition of the two, so there are certain differences in performance and

Features Of 8021 Aluminum Foil - News - Henry Metal

Sep 04, 2021  Features of 8021 Aluminum Foil: 1. Reduced costs. Minimal pinholes (a 70% reduction compared to Aluminum Foil 7μ) ensures better performance for applications such as pharmaceutical packaging, electronics packaging, retort packaging and LL containers, all of which require barrier performance. This better performance helps reduce costs.

Application Of 8011 Aluminum Foil In Aluminum Bottle Cap

Jun 28, 2021  Aluminum bottle c ap material in people\'s lives has more and more applications, replacing the original tinplate and stainless steel. A luminum bottle cap material generally use s 8011 aluminum foil, and the thickness of it is generally between 0.17mm-0.5mm. 8011 alloy in general use direct press molding as cover making method. L iquor bottle cap, red wine bottle cap has high utilization, and

High Quality Cold Form Pharmaceuticals Aluminum

How is the quality of aluminium foil for medicine. The aluminium foil for medicine use 8011 and 8021 aluminum foil with temper O and H18. The medicine aluminium foil has a thickness of 0.04mm-0.065mm and is commonly used in the production of cold-form foil, alu alu foil, aluminum blister foil, pvc/pvdf/pe/pet alu foil.

Aluminium Foil For Pharmaceutical Packaging - Aluminum

Oct 12, 2021  The aluminum foil for pharmaceutical packaging is widely used in the emerging industries of pharmaceutical tablets, capsules and other pharmaceutical packaging. According to the requirements of customers, the process of printing, coating, winding, slitting, internal and external packaging is gradually produced into customer satisfaction

Pharmaceutical Aluminium Foil

Aug 10, 2021  Tropical type medicinal aluminum foil: It is also called aluminum-plastic aluminum, which is equivalent to adding a layer of cold stamping aluminum foil outer cover on the outside of the plastic blister and PTP aluminum foil. 8021-O aluminum foil and 8079-O aluminum foil are mostly used, which is the highest-end packaging aluminum foil in

Pharmaceutical Aluminum Foil For Packaging Price

Applications of Pharmaceutical Aluminum Foil For Packaging: 1) As the shield of PVC hard films for blister packaging, it doesn\'t directly contact foods or drugs, suitable for high-density drugs 2) High barrier performance against moisture, oxygen, light and UV

Pharmaceutical Packaging With Gas-Barrier Aluminum Foil

Pharmaceutical Packaging with Gas-Barrier Aluminum Foil (Alloy 8011), Find details about Aluminum Foil, Aluminium Foil from Pharmaceutical Packaging with Gas-Barrier Aluminum Foil (Alloy 8011) - Xi′an Fangzhou Packaging Industry

Cold Stamping Mould Pharma Foil

Cold Stamping mould Pharma Foil. Description. 1. The foil needs to be plain, free from streaks, unevenness wrinkles, scratches, cracks, rust residuals, oil spots, oxidation and stains or from any other defects. 2. The end face of the foil roll should be plain, no edge warping and bruise.

Blister Aluminum Foil, Blister Aluminum Foil

Quality Aluminium/Aluminum Foil 8021 O Cold Forming Pharmaceutical Foil, Blister Packaging, Medicine Packaging, Tablet Packing Foil 0.02mm FOB Price: US $ 2500-3400 / Ton Min. Order: 2

Packaging Materials - Aluminum Foil, Aluminium Foil

View reliable Packaging Materials manufacturers on . This category presents Aluminum Foil, Aluminium Foil, from Packaging Materials suppliers to global buyers., page

Pharmaceutical Packaging Aluminum Foil

Hot Aluminum Foil 8021 O Pharmaceutical Foil, Blister Packaging, Medicine Packaging, Tablet Foil, Ptp Packaging Alu Foil 0.02mm FOB Price: US $ 2500-3400 / Ton Min. Order: 2

Pharmaceutical Aluminum Foil Price | Supplier

Metal Corporation is the leading manufacturer and supplier of Pharmaceutical aluminum foil for more than 14 years. We provide various types of Pharmaceutical aluminum foils for the global market, like blister aluminum foil for PTP packaging sealed with PVC/PCDV, Alu alu foil for cold forming, composite aluminum foil for pharmaceutical tablet bag